Gated Community Security System
- For better security in housing community, more and more people are moving into and raising families in "gated communities." This gated residential communities and garden apartments across the country are being built at record rates.
- All gated and fenced residential communities have several things in common. Gates and fences provide the perception of security, safety, and privacy. In affluent residential neighborhoods, privacy means exclusivity and therefore increased property values.
- Management needs to screen residents and enforce community rules to prevent criminal types from residing on the inside. Residents need to report or challenge unauthorized persons.
1) Camera Scan Vehicle Number Plate at Entrance (Optional or Alternative to Owner's Gate Remote)
2) At the MAIN Gate / Gated Community Security Control Room, Master Intercom will be installed.
When Camera System DON’T Gives Permission for Vehicle to Enter, Security Officer will enquire the Vehicle Owner, which House are the Going To. Security Officer will Message to the House Owner through the MAIN Intercom System at Security House.
- Security Guard Use the Master Intercom call to the owner house number
- House owner will decide to let the car go in
- If the owner did not at home, the call will route to the owner mobile phone
- Owner can answer the call anywhere in the world
- If the owner did not answer the mobile phone, then the call can route to another number (Up to 3 family members can authorized the car drive in)
Additional Function: Slave can call to the guard house if need to talk to the guard. The phone can routing to the Guard Management office if need any security assistance.
Send Us Enquiry
3G Wired Alarm System (Model: WT-1010SA)
- GSM All-In-One Telephone and Alarm System.
- The system has the function to send sms and call to the user in the even of input triggered.
- Input alarm zoning can be edited and programmed
- Standby recharger battery to prevent power failure or electricity cut off by intruder
- Automatically call to 8 pre-programmed phone numbers while alarming
Witura’s GSM Alarm System can cover 8 alarm zones within the premises. In addition, the unit can be connected to window breaking sensors, motion detectors and other alarm triggers. Once triggered, alerts can be sent to 8 pre-set numbers.
The SMS alarm unit also comes completed with 3 sms remote control zones. Through this, you can activate a number of electrical appliances and equipment like the air-conditioner, generator, sensors, and lighting remotely via sms or phone call. Using this service can help in theft prevention as lighting can be switched on or off remotely to give the impression that there are people on the premises. If the premises comes with an auto gate, the WT-1010SA GSM alarm system can also be used to open/close the gate via either the remote control unit or via a command through the telephone unit.
The SMS alarm system comes with 2 remote control units to arm and disarm the burglar alarm system. All In One Telephone and Security Alarm System. These remote control units are also multi-functional and can be used not just for arming and disarming the security alarm system, but also as an emergency/panic button, as a remote to open the garage door/ main gate, to switch on/off electrical appliances within the home. Another feature of the WT-1010SA is that the GSM alarm can be armed and disarmed remotely using the mobile phone.
As the WT-1010SA SMS alarm works on a wireless system, the risk of thieves ‘cutting’ the connection is low as there are no wires to connect the unit to the telephone line. Even if the thieves use a GSM ‘jammer’ to cancel the wireless signal, the WT-1010SA SMS alarm has been designed to overcome this. When a GSM ‘jammer’ is detected, the unit will automatically send out a sms and trigger the alarm siren.
All In One Telephone and Security Alarm System to ensure that in cases of power failure or if the power supply has been ‘cut’ by thieves, the WT-1010SA burglar alarm is equipped with a standby rechargeable battery to ensure that the unit continues to function. In the event of power cut, the unit will again automatically send out a sms to the pre-set mobile number to inform that the battery has failed. Another feature of the WT-1010SA GSM intruder alarm is the auto test reporting system whereby the system will, at the programmed time, test to ensure that the system is ‘alive’. A message is then sent to the pre-set mobile number. This auto test ensures that the security alarm system is constantly functioning.
WT-1010SA as a Telephone System
Let’s face it, installing a new phone landline can be a nightmare. From the moment you apply till the time the line is installed, it could take a long while as the date of installation is determined by the availability of personnel from the telephone company. While waiting for installation, there is also the inconvenience of not having a communications line available.
All In One Telephone and Security Alarm System Installation of a landline telephone system also normally involves the payment of a deposit, which could be a significant amount of upfront expenditure if it’s for a business premises. Apart from the deposit, there’s also a month phone line rental regardless of whether or not calls are made. When the time is ready for installation of the landline telephone system, for aesthetic purposes, there might be small renovations involved. This will incur additional costs.
The WT-1010SA unit can also be connected to a basic telephone and used to make phone calls. Using the WT-1010SA as a telephone system has many advantages over traditional landlines.
Firstly, all that’s needed to activate the phone line is a GSM SIM card which is easily applied for can be used almost immediately. The system works with both prepaid and postpaid SIM cards.
In today’s communications environment, many phone calls are made to mobile lines. Mobile phone operators normally have plans that offer very low All In One Telephone and Security Alarm System cost or complimentary calls within the same network. By using a GSM based phone for your premises, it can help to save on your monthly phone bill as there is no monthly phone line rental costs to bear and calls made between landline and mobile lines normally cost more too.
The WT-1010SA GSM alarms and telephone system offers the perfect solution for those who are renting their premises. Apart from the upfront and on-going savings, when the lease is over, the system can be very quickly dismantled ready to install in your new rented premises.
Send Us Enquiry
3G Wireless Alarm System (Model: WT-1672B)
- Remote control: allow you to use your mobile phone to control your business from any location.
- Can connect to 9 Zones wireless burglar alarm system at the same time
- The product appearance, lightweight, easy wire connection
One of the most popular do-it-yourself home security solutions is the installation of a wireless alarm system. Affordable and easy to install, wireless systems are highly recommended to anyone who wants to avoid drilling into walls or who wants to bypass complicated wiring instructions without compromising security. We are pleased to offer a vast array of wireless alarm systems
Not only are wireless alarm systems ideal solutions for those who wish to skip a more labor-intensive installation process, but they offer security for places where a hardwired system is not practical. Such includes structures where hardwired systems are not an option due to factors like brick or concrete walls, or even structures with tile flooring or a lack of attic space-- all which limit options for wiring installations. Wireless alarm systems, on the other hand, can be installed just about anywhere
The kits that we offer include key security components like contacts, motion sensors, remote control and more of these, include GSM modules, which allow the system to interact with a home owner’s mobile device by sending a text message or call to the owner’s whenever certain events occur while the system is armed, such as a door or a window being opened, or whenever the system has been tampered with.
Send Us Enquiry
Cellular Trailer Alarm System (Model: WT-1672-CTA)
- No more worrying if your tools and equipment are going to be there the next day. If any intruder, the unit will call and texts to the trailer owner and the loud siren are made to notify far off neighbours and move intruders out and away from your customer property.
- The cellular trailer alarm is the ideal alarm system specifically designed for your Construction Trailer needs, giving you peace of mind wherever your equipment is.
Send Us Enquiry
GSM Power Outage Alarm System (Model: WT-1672A)
Power Outage Alarm is a simple to detect loss of power (power cuts). Once power loss is detected, the unit will call and SMS to your cell phone via the mobile phone network to 5 designated phone number and/or sound an audible alert to make you aware of the power failure.
Regardless of the reasons for your power cut, any failure of your mains electricity supply can be a nuisance. For some, though, a power blackout can be more than just an inconvenience. If you have important equipment that needs to be kept running and you need to know if there's a power failure even when you're not there then Power Outage Alarm is the important alarm for you.Reason why need Power Outbreak Alarm:
- Sump Pumps
- Gas Furnaces, Electric Furnaces and Heat Pumps
The Power Outage SMS Alarm can safeguard refrigeration, freezers, unoccupied property, lighting units, computer equipment including servers, security equipment and can also be used for care of the elderly or people at risk should their power fail at home.
Power Outage Alarm notifies you by SMS text message when your electrical equipment suffers a power outage. If you have important equipment running and want to know if there has been a power cut while you're not around, the WT 1011RC can help. From Freezers to Fish Tanks and all things electrical, Power Outage Alarm can provide you with additional peace of mind.* and many other applications.
- chemical storage monitoring;
- heating system monitoring;
- computer equipment monitoring;
- sump pump monitoring;
- generator monitoring;
- fish tank monitoring & aquarium monitoring;
- fridge monitoring & freezer monitoring;
Typical uses include:
- Re-connection Notification: Choose to be notified when the power comes back on. This may prevent you from having to rush back to take action when it isn't necessary.
- Choose to sound an audible alarm on your device when the power goes out so that you can be alerted when you're home.
- Ignore Short Duration Outages: Choose to only be notified if the power goes off for more than a certain period of time that you've specified.GSM Remote Control function: You can use your mobile phone call to the unit to re-set ELCB, ON / OFF. Unit supply with 30A relay
- Remote control: no distance, time constraints, as long as there is cell phone network signal, it can be received the power outage alarm.
- Product appearance, lightweight, easy wire connection: product is small, light, beautiful, connect with power supply of AC220V.
- Product integration, simple operation: using a mobile phone to send SMS commands to access all the operations, which convenient for user to use and operate.
- High Safety Performance: This product settings having a system passwords and administrator operating rights restrictions, this have been highly improve the safety of products.
- Enables users to truly experience the new feeling of intelligent management. Manipulation without sending a personnel to the scene to save unnecessary waste of time and manpower costs and expenses.
Send Us Enquiry
GSM Dialer For Alarm Backup System (Model: WT-1010C2)
- Witura’s WT-1010C2 GSM alarm backup system can connect to any panel likes Texecom, Pyronix, Securit as the alarm GSM backup If any landline is been cut by intruder or faulty, the gsm dialer must be intelligent enough to identified the line cut and sent out the alarm signal to the police, house owner and alarm receiving center (ARC).
- This GSM communicator is important to use in the places likes Banking, ATM machines, jewelry shop, notebook house and etc where double protection on properties is required.
- The WT-1010C2 GSM dialer inbuilt the audible data transferring protocols likes Contact ID, SIA, ADEMCO into the unit and ensure all the security protocol format can be transmitted to the center monitoring station.
Usually, the alarm panel in the market will use telephone line (landline) as the main communicator to sent the alarm signal to the police, house owner, center monitoring station if any alarm trigger because of intruded or sabotage. Witura’s WT-1010C2 GSM alarm backup system can connect to any panel likes Texecom, Pyronix, Securit as the alarm GSM backup If any landline is been cut by intruder or faulty, the gsm dialer must be intelligent enough to identified the line cut and sent out the alarm signal to the police, house owner and alarm receiving center (ARC)
This GSM communicator is important to use in the places likes Banking, ATM machines, jewelry shop, notebook house and etc where double protection on properties is required.
The WT-1010C2 GSM dialer inbuilt the audible data transferring protocols likes Contact ID, SIA, ADEMCO into the unit and ensure all the security protocol format can be transmitted to the center monitoring station.
The basic function of the GSM Terminal as below:
- Use as the telephone line backup in alarm system - Phone lines can easily be cut off during storms, construction work, accidents, or even deliberate tampering by intruders. WT-1010C2 will checks the status of the telecom line in the alarm panels likes Paradox, DSC, Honeywell and in case the telecom line become unavailable, the WT-1010C2 will transmit the alarm using GSM to the alarm receiving center (ARC) or Center Monitoring Station (CMS).
- Standby recharger battery to prevent power failure or electricity cut off by intruded. The GSM will function as normal when no electricity supply. LCD display to check the GSM signal strange and battery capacity.
- Auto self check and restart function: It can continuously monitor the system status of its own. When there is a problem with the SIM card or the module is not working properly, it will automatically restart the system.
- Automatically call to 8 pre-program phone numbers while alarming. The WT-1010C2 also will SMS to 8 programmable cell phone number to notify the user that the PSTN line has been cut off or unavailable.
- In order prevent professional thief tries to disconnect GSM by using “GSM Jammer”, WT-1010C2 will transmit the contact ID using telecom line if GSM signal drop immediately and trigger the siren.
- Low power consumption - uses 30mA while in idle state and 260mA when transmitting an alarm.
- Auto Test Reporting System - After the programmed reporting time, the WT-1010C2 will dial the programmable center station number. Once the call is connected, it will transmit the programmable contact-id to the central station and hang up. This function is to make sure that “GSM alive” daily and able to report to ARC if any emergency.
- Programmable Contact ID - The WT-1010C2 has built-in alarm inputs that allow the unit to send additional signals (with user programmable Contact-ID event) to the monitoring station. Supported Protocol Pager message (DTMF no handshake).
- Three Remote Controlling Outputs - These open collector outputs (that can sink max 300MA per output) can be turned on and off remotely through a SMS. You can use them to pull to ground your inputs. Remote control will be reachable by sending a SMS with a certain command. For example, switch on lighting, air conditional, or switch off generator, sensor using your mobile phone.
- Three Digital Inputs - The system has the function to send alert message to the user in the event of input triggered. For example, Zone 4 connected to an electrical door, when there is intruder or electrical door is open illegally, WT-1010C2 will receive short circuit impulse on Zone 4 and automatically send a signal to the monitoring station and notify the owner. It is possible to enable or disable the function by sending the SMS command to the unit.
- Input alarm message can be edited and programmed up to 50 characters long. You can use this function to program any languages. You can change the displayed text by sending a command by SMS to the unit.
- Permanent +V Output Facility – This output is available and ground on the main board. The output voltage is according to power supply and it can be used to power on other facility or device.
- Wall mounting enclosure available: The WT-1010 units can be installed inside the alarm panel or inside its own wall mount enclosure.
Send Us Enquiry
Animal Trap Alarm System (Model: WT-1671)
- The new Animal trap alarm allows you to be alerted via SMS whenever an animal trap has been activated and an animal has been captured.
- This allows a quick response to attend and recover the animal and reduce the stress and suffering for the animal.
- This unique system will also save valuable traveling costs and time when having to manually check each remote animal trap daily.
- The concept is extremely simple and the unit remains completely dormant using no power until the system is activated by the sprung loaded door removing the Magnet Key from its holder.
- Once the Magnet Key is removed the system immediately boots up on to the local Mobile Phone Network and can send a customized S.M.S text alerts to up to 5 separate telephone numbers.
- The system comes with two Rechargeable Battery so as to be able to keep one fully charged at all times. The system is Dual Band or Quad Band and will accept any Global Network GSM SIM Card.
- Operation Voltage: 12 volts DC
- Operating Current: Maximum 500mA, typically 55m
- AGSM Frequency MHz: GSM 850, GSM 900, GSM 1800, GSM 1900
- Humidity: Less Than 80% RH
- Operating Temperature: -20c to 55c
- Protection: IP 65 Weather Proof Casing
- Approvals: C.E, FCC, ETSI
- Load up to 5 administrators number in the white list as authorized users
- Multi-country AC power outlet accepted UK, EU, USA, Australia plugs
- 3G or quad band frequency, 850/900/1800/1900 or 850/900/1800/1900/2100mhz
- On Board Diagnostic status LED’s3G/ GSM Module use is high sensitivity with built in high gain antenna
- No geographical limits, you can control your equipment anywhere in the world
- Password protected to prevent from un-authorised users